Introduction; Device Description; Scope Of Delivery; Intended Use - Scheppach 7906100715 Original Bedienungsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the us-
er to become familiar with the machine and take ad-
vantage of its application possibilities in accordance
with the recommendations.
The operating instructions contain important infor-
mation on how to operate the machine safely, profes-
sionally and economically, how to avoid danger, costly
repairs, reduce downtimes and how to increase relia-
bility and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture.
Read the instruction manual each time before operat-
ing the machine and carefully follow its information.
The machine can only be operated by persons who
were instructed concerning the operation of the ma-
chine and who are informed about the associated dan-
gers. The minimum age requirement must be complied
with.
14 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules for operating
woodworking machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description

1. Exhaust air aperture (can be rotated)
2. Trigger
3. Handle
4. Threaded nipple
5. Magazine lever
6. Magazine
7. Fill level indicator
8. Trigger lock
9. Mouth
10. Face plate
11. Face plate quick clamp lever

3. Scope of delivery

1x Compressed air stapler
1x oil bottle
1x safety goggles
1x allen key 4 mm
Each 250x nails (15 / 25 / 40 / 50 mm)
Each 250x staples (length 16 mm / 40 mm)
500x staples (length 25 mm / 40 mm)
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!

4. Intended use

The stapler is a pneumatically operated tool designed
for versatile use.
This equipment is designed for driving finishing nails
and staples into wood and similar materials. Only use
the types of nails/staples described in the "Technical
data" section or illustrated on the information sign on
the magazine. Never use any other nails/staples. Nev-
er use on hard surfaces such as stone, metal, etc.,
either.
www.scheppach.com