Lindy 38396-7 Benutzerhandbuch Seite 12

User Manual
As default IP mode of Control LAN port of the Controller is DHCP, the PC also needs to be set to Obtain
an IP address automatically mode and a DHCP server is required.
If there is no DHCP server in the system, 192.168.0.225 will be used as the IP address of the Control
LAN port. The IP address of the PC must be in the same network segment, for example set PC's IP
address as 192.168.0.88.
Web GUI can be accessed by inputting Control LAN port IP address (192.168.0.225) or the URL
"http://controller.local" on the computer's browser.
For details, please refer to the 4K30 HDMI & USB over IP Controller user manual.
Infrared Control
The Extender features an IR In and Out port, with a pair of IR extension cables provided. The extension
cables allow an IR remote control to be used from the Decoder to the Encoder or vice versa.
Network Switch
The network Switch used to set up the system must support the features below:
Layer 3/managed
•
Bandwidth 1 Gigabit
•
Support IGMP snooping
•
8K Jumbo frame
•
Lindy tested this Extender with a Netgear XSM4316S Switch.
English