Insertion Of Batteries; Charging Of The Batteries; Scope Adjustment; Basic Operation - optris P20 2M Bedienungsanleitung

________________________________

Insertion of Batteries

Remove the battery lid at the handle of the unit.
Remove the battery holder and insert the
batteries. Observe the correct polarity.

Charging of the Batteries

In order to charge the batteries please connect
the charger cable to the USB interface.

Scope adjustment

In order to adjust the scope remove the
protection caps. Using a screw driver you
can adjust the middle of the cross hair.
Adjust the cross hair to the middle of the
laser dots.

Basic Operation

T
EMPERATURE
Please aim with the unit at the target and press
the T
RIGGER
HOLD function: After release of the T
display values will be shown for 7 seconds.
Shut down: If you do not press any button
during the HOLD mode the unit shuts down
automatically after 7 seconds.
D
ISPLAY BACKLIGHT
Please press the D
T is pressed to switch the display
RIGGER
backlight on or off.
L
ASER
Please press the U
pressed to activate/ deactivate. The current
status will be shown in the display.
M
EASUREMENT
.
OWN
button while the T
P
button while the
25
all
RIGGER
is
RIGGER