Power Supply - Knick VariTrans P 15000 Bedienungsanleitung

4. Mounting
The standard-signal isolators are mounted on standard TS 35 rails.
5. Electrical connection
Terminal assignments
1 Input + current
2 Input - current
3 Input + voltage
4 Input - voltage
5 Output +
6 Output -

7 Power supply

8 Power supply
Wire cross-section max. 2.5 mm
Multi-wire connection max. 1 mm
(two wires with same cross-section)
Warning! Do not operate inputs for current and voltage simultaneously!
For applica-tions with high working voltages, take measures to
prevent accidental contact and make sure that there is sufficient
distance or insulation between adjacent devices!
5.1 Power supply
22 to 230 V AC/DC ±10 %, approx. 1 W, AC 48 to 62 Hz
2
2
17