b)
Use only non-corrosive cleaning agents for cleaning the surfaces.
c)
Perform regular inspections of the unit checking technical fitness and any
damages.
d)
Use a soft cloth for cleaning.
e)
Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) for
cleaning, as these may damage the surface of the material from which the unit
is made.
f)
Do not clean the unit with acidic substances, medical products, diluent, fuel,
oil or other chemicals as this may cause damage to the unit.
g)
Clean the unit regularly, especially the filter. The need for cleaning may
manifest itself in poorer pump performance or lower fountain flow.
3.5.1.
CLEANING THE FILTER:
1. Remove the suction basket [2] / [17].
2. Remove the filter.
3. Clean and rinse with clean water.
4. Replace the filter and replace the basket.
3.6. Disposal of used units.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the product,
operating instructions or packaging. The materials used in this unit are recyclable
according to their marking. You will be making an important contribution to
protecting our environment by reusing, recycling or otherwise disposing of used
units.
Your local administration will provide you with information about the
appropriate disposal point for used units.