Inhaltsverzeichnis
Werbung
CONNECTIONS
Power Switch: Powers on the unit.
1.
Channel 1/Channel 2 Volume Knob: Adjusts volume of amplifier.
2.
XLR and 1/4" Input: Amplifier inputs.
3.
Mode Switch: This switch controls the amplifier's operating mode. The amplifier can
4.
operate in two different modes; Mono Bridge or Stereo.
Ground Switch: This switch allows the ground signal or chassis ground to be separated
5.
in case of a ground conflict. For the safety of the amp, it is recommended to keep the
switch in the GND FLOATING position. In case of a ground conflict please set the switch
to GND LIFT.
Speakon Output: Optional speaker output connections. Use pins 1+ and 1- of this 4-pole
6.
Speakon connector to connect to your speaker's Speakon input jack.
Bridge and Ground Connections: Connect to your speaker's input jack. Red is positive
7.
signal and Black is negative signal. When using Bridge Mode, use Channels 1 & 2 positive
connectors (Red).
Note:
In Bridge (Mono) mode, CH2 input is used. Audio connected to CH 1 will not get
routed to speaker output.
Power Cord Receptacle: Plug your power cable in here
8.
4
Werbung
Inhaltsverzeichnis
