Care And Maintenance - Sennheiser HD 820 Bedienungsanleitung

1 2
1 2
1 2

Care and maintenance

For reasons of hygiene, you should replace the ear pads, the inside dust
covers and the headband from time to time. Spare parts are available from
your Sonova Consumer Hearing partner. To find a partner in your country,
search at www.sennheiser-hearing.com/service-support.
▷ Clean the product only with a dry and soft microfiber cloth (supplied).
▷ Store the product in a clean, dust-free place, e.g. in its storage box.
Cleaning and replacing the dust covers made from 3D Mesh
1. Pull the dust covers away from the ear cups without, if possible,
touching the transducers underneath.
Rinse the dust covers under running lukewarm water and let them air
dry.
2. Put the dust covers back in place and carefully tuck the edges under-
neath the ear pads.
Replacing the ear pads
1. Grasp behind the ear pads and pull them up and away from the ear
cups. Make sure to not damage the transducers on the inside of the ear
cups.
2. Place the new ear pads onto the ear cups and attach the ear pads by
pressing firmly around them.
Replacing the headband padding
1. Hold the headband firmly in the middle and detach the headband pad-
ding from one side to the other.
2. Place the new headband padding onto the headband and attach it to the
headband's latches, starting from the middle and moving outwards.
HD 820 | English
5