Description - ALFRA ROTABEST SP-V Bedienungsanleitung

dEScRiPTiOn

The magnetic drill stand can be attached to ferromagnetic workpieces using the installed mechanically
switchable TML permanent magnet (D). For this purpose, the magnetic lever (G) must be pressed
downwards and the safety tab (F) must latch into place correctly. A self-adjusting dovetail guide (C) which
the collar (A) is attached to can be vertically adjusted using the star handle (H). Mains or battery-operated
machines can be clamped in the clamping neck which have a corresponding clamping collar.
As an additional torque support there is a nose on the collar in order to engage the drilling machine into the
collar. The type plate and an attachment possibility for the Allen keys included can be found on the back of
the machine.
A
B
A) Tool holder (Ø 43 mm, Ø 48,6 mm
Ø 61,7 mm)
B) Quick clamping lever
C) Slide and setting screws for
adjustment on the back
61
12
D) Magnetic base
E) Recess for safety belt
F) Safety tab
G) Lever for magnet
H) Star handle
34
135
190
345
H
C
D
72
90
G
F
E
149