Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Replacing the oven lamp
Before proceeding, disconnect the appliance from the power line to avoid the possibility of
electric shock.
• Unscrew the glass cover of the lamp.
• Replace the light bulb with a new equal bulb (25 W, 230V, T300°C halogen lamp).
• Refit the glass cover.
• Plug the appliance in.
6
problems & solutions
Problem
The oven lamp is not lit.
The oven is not heating up.
The control light of the oven function is not lit up.
7
installation instructions
• The safety during use can only be guaranteed when the oven is installed correctly and according to the regulations. The
installer is responsible for any damage caused by a faulty installation.
• The electrical connection must be made by a qualified electricien. This person is aware of the national and local
regulations the installation must comply with.
• The appliance falls under protection class I and can only be used in combination with a grounding conductor connection.
The manufacturer accepts no responsibility for any malfunction or damage caused by incorrect electrical installations.
•
The appliance must be connected to a fixed installation and the means of disconnecting it from the fixed installation
must be installed according to the installation instructions.
• The connection cable must hang freely. Do not tie the power cable or pass it along sharp edges. It must be positioned so
that it does not touch any of the hot parts of the oven.
• The connection point, the wall socket and/or plug must always be accessible.
• The cabinet into which the oven is fitted, must be heat resistant (> 100°C).
• Ensure that the cabinet into which the oven is installed is secure. For example, by mounting it to the adjoining elements.
• Damage caused by incorrect connection, incorrect use or incorrect fitting is not covered by the guarantee.
Attention: any change to the appliance's interior, including fitting and changing the power cable, must only be
performed by a qualified electricien.
20
•
English
Solution
Replace the oven lamp according to the instructions.
- Has the correct temperature and oven function been set?
- Is the door of the oven closed properly?
- Is an oven function selected?
Werbung
Inhaltsverzeichnis
