Emergency opening using master code
PIN 6X
CLEAR
PIN 6X
CLOSE
PIN 6X
CLOSE
➤ Enter the correct six digit master code.
➤ Press the CLEAR button.
✓ The display shows the message NEW.
➤ Enter a new six digit master code.
➤ Press the CLOSE button.
✓ The display shows the message AGAIN.
➤ Repeat the entry of the new six digit master code.
➤ Press the CLOSE button again.
✓ The safe confirms the change of the master code with the message DONE.
9.1
Emergency opening with the master key
A
NOTICE!
No unauthorised persons should have access to the master key.
Store the master key very carefully in a safe location.
The safe lock can be opened in all eventualities with the master key, even in the event
of an electronic fault.
Opening the safe with the master key
➤ Slide the plastic cover which covers the key hole (fig. 1 5, page 2).
➤ Put the master key into the key hole.
10
NEW
AGAIN
MD310, MD390, MD450
EN