Preparation; Check Delivery Content; Requirements For The Installation Site - HOLZMANN-MASCHINEN FKS400V32PRO 400V Betriebsanleitung

A safety instruction designed in this way indicates a possibly hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical
aptitude/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends on you!
TRANSPORT
Transport the machine in its packaging to the installation site. To manoeuvre the machine in its
packaging, e.g. a crane, pallet truck or forklift with appropriate lifting capacity and a fork length of
at least 1200 mm can be used. The specifications can be found in the chapter Technical data. For
proper transport, observe the instructions and information on the transport packaging regarding
centre of gravity, lifting points, weight, means of transport to be used as well as the prescribed
transport position etc. Make sure that the selected lifting equipment (crane, forklift, lift truck, load
sling etc.) is in perfect condition. Only use tested transport and lifting devices that correspond to
the weight and dimensions of the machine!
ASSEMBLY
14.1

Preparation

Check delivery content

Check the delivery immediately for transport damage and missing parts. Report any damage or
missing parts to your dealer or the shipping company immediately. Visible transport damage must
also be noted immediately on the delivery note in accordance with the provisions of the warranty,
otherwise the goods are deemed to have been properly accepted.

Requirements for the installation site

The chosen installation site must have a suitable connection to the power supply and a connection
to a dust collection system. Observe the safety requirements and the dimensions of the machine.
Place the machine on a level, solid surface solid surface that can support the weight of the
machine. The chosen installation site of the machine must comply with the local safety regulations
as well as the ergonomic requirements for a workplace with sufficient lighting conditions.
HOLZMANN Maschinen GmbH
C AU TI O N
A: Transporting points for forklift
www.holzmann-maschinen.at
N O TE
TRANSPORT
36
FKS400V32PRO_400V