Maintenance And Cleaning; Preventing Bad Odour; Protecting Plastic Surfaces - Beko GNO163040X Bedienungsanleitung

6

Maintenance and Cleaning

Cleaning the product regularly will prolong its
service life.
B
WARNING: Disconnect the power
before cleaning the refrigerator.
Do not use sharp and abrasive tools,
soap, house cleaning materials,
detergents, gas, gasoline, varnish and
similar substances for cleaning.
Melt a teaspoonful of carbonate in
the water. Moisten a piece of cloth
in the water and wring out. Wipe the
device with this cloth and dry off
thoroughly.
Take care to keep water away from
the lamp's cover and other electrical
parts.
Clean the door using a wet cloth.
Remove all items inside to detach
the door and chassis shelves. Lift the
door shelves up to detach. Clean and
dry the shelves, then attach back in
place by sliding from above.
Do not use chloric water or cleaning
products on the exterior surface and
chrome-coated parts of the product.
Chlorine will cause rust on such
metallic surfaces.
Do not use sharp, abrasive tools,
soap, household cleaning agents,
detergents, kerosene, fuel oil,
varnish etc. to prevent removal and
deformation of the prints on the
plastic part. Use lukewarm water and
a soft cloth for cleaning and then
wipe it dry.
Refrigerator / User Guide

6.1. Preventing Bad Odour

The product is manufactured free of any
odorous materials. However, keeping the food in
inappropriate sections and improper cleaning of
internal surfaces may lead to malodour.
To avoid this, clean the inside with carbonated
water every 15 days.
Keep the foods in sealed holders.
Microorganisms may spread out
of unsealed food items and cause
malodour.
Do not keep expired and spoilt foods
in the refrigerator.

6.2. Protecting Plastic Surfaces

Oil spilled on plastic surfaces may damage the
surface and must be cleaned immediately with
warm water.
35 / 37 EN