Troubleshooting; Troubleshooting Table; Technical Data - Inventum AKD8005ZWA Benutzerhandbuch

6. The lamp holder will spring back in position by itself. If this doesn't happen, carefully bend the holder back in
position.
7. Install the grease filter.
8. Repeat the steps for the second lamp.
7

Troubleshooting

GENERAL TROUBLESHOOTING PROCEDURE
1. Try to find a solution for the problem with the help of the troubleshooting table.
2. If you cannot find a solution for the problem, contact the Inventum-servicedienst.

TROUBLESHOOTING TABLE

Problem
The motor does not operate.
The appliance does not operate
correctly or makes an unusual
sound.
8

Technical data

TECHNICAL SPECIFICATIONS OF THE COOKER HOOD
Item
Energy efficiency class
Air flow rate (at min/max speed) [m3/h]
Air flow rate (at high speed/turbo mode) [m3/h]
Lighting efficiency class
Grease filtering efficiency class
Power consumption in standby mode (Ps) [W]
Noise level at min/max speed [dB]
Noise level at min/max speed (at high speed/turbo
mode) [dB]
Color
Number of motors
34 • English
Possible cause
The mains plug is not connected.
There is no mains supply.
There is a problem with the fuse.
The dimension of the outlet is not
correct.
The outlet has a blockage.
The grease filter is dirty.
The carbon filter is worn.
Specification
B
260/430
665
A
E
0.45
51/62
68
Black
1
Possible solution
Connect the mains plug.
• Do a check if the mains plug is
correctly connected to the mains
socket.
• Make sure that the mains supply
is on.
Do a check on the fuse box.
Make sure that you use the correct
dimension during installation. Refer
Installation
to chapter .
Remove the blockage.
Clean the grease filter. Refer to
Cleaning the grease filter
section
Replace the carbon filter. Refer to
Replacing the carbon filter
section
(optional)
.
.