Argo MONOSPLIT R32 WIFI Bedienungs- Und Wartungsanleitung Seite 88

4. Help
Press Help to view the instructions for
5. Feedback
Clic Feedback to send a feedback on the product.
6. How to reset the air conditioner WiFi module:
Turn off the unit with the remote control and disconnect the air conditioner power for at least 10 seconds. Reconnect
the power supply. After 1 minute, press the "WiFi" and "Mode" buttons simultaneously. If the air conditioner beeps, it
means that the WiFi module has been reset correctly.
Attention: The configuration is carried out within 2 minutes. If it does not happen within 2 minutes, repeat the reset
operation.
Analysis of common network setting errors:
If the short distance control does not work, perform the checks specified below:
• Make sure the air conditioner power is connected.
• Make sure that the air conditioner's WiFi function is normally active.
• Make sure your phone's WiFi selects the corresponding air conditioner.
• Reset with the remote control and restart the setting from step 3.
It is important to remember what is listed below.
1. The WiFi function of the air conditioner takes about 1 minute to start.
2. The air conditioner is equipped with memory function.
EWPE SMART APP.
88