Sound On/Off - Bräunlich QUTS8 Bedienungsanleitung

NOTE: when select ON, the ground hole must be connect with ESD
ground, otherwise, alarm hint（ESD in main interface show as red）
After setting ESD function ,press STORE save, press "Back" return
parameter setting interface, press "Back" return main interface.
2.6.10 Soldering Hint Setting
1) Press "1", "+" or "-" key to select "Soldering tip" setting.
2) Press "2" to enter soldering hint setting interface. Press "1" to select soldering
hint: Soldering tip mode (ON/OFF). Set the soldering prompt time by pressing
the "+" or "-" key, the setting range: 1S～99M. When the displayed
temperature reaches the set temperature, the motor will start the interval
prompt according to the set time. For example, if 1S is set, the cycle will
vibrate every 1S.
3) Press "2" to save, press "3" to return to the main interface.

2.6.11 Sound ON/OFF

A l a r m t e m p +
A l a r m t e m p -
O N O F F
P a s s w o r d
T i m e ： 0 1 S
E S D T e s t
W e l d i n g t i p
A l a r m t e m p +
A l a r m t e m p -
O N
P a s s w o r d
T i m e ：
E S D T e s t
W e l d i n g t i p
13
USER MANUAL
O F F
0 1 S