V-TAC VT-948 Installationsanleitung Seite 4

TWO WORKING MODES
No-Use Bu�on
Func�on Bu�on
ON-OFF Bu�on
Mode A
Lamp will automatically lights up at night and keep 100% brightness at the first 3 hours, 70%
brightness for the next 2 hours, and then 50% brightness till dawn. The lamp will adjust brightness
according to the dynamic capacity of the battery.
Mode B
Lamp will automatically lights up at night and keep 100% brightness, after 6 hours or when battery
power is less than 30%, lamp turns off.
HOW TO REPLACE BATTERY
Battery Pack
18650, 7.4V,
2000mAh, 14.8Wh
After 6 hours
Or when battery power is less than 30%
1. Loosen the screws, open battery cover.
2. Disassemble the connector and take out the battery
pack.
3. Put the new battery pack inside and connect it well
with connector.
4. Lock the battery cover.
ENGLISH
Please press the buttons to
adjust working mode:
1. Press ON-OFF Button 1st time, the
lamp is turned on and work in Mode
A, which is default working mode.
2. Then press the Function Button,
the lamp enter Mode B.
3. Press the ON-OFF Button again, the
lamp turns off.