Parking Mode - VANTRUE Mirror 3 Bedienungsanleitung

mode and will not affect normal recording.
Note: Low-light Night Vision in Parking Mode is only
automatically adjusted for front-lens video footage.
EN EN
Low-light Night Vision Off

4.12 Parking Mode

There are 3 modes to choose from in the parking mode of
M3: collision detection, low framerate mode, and motion
detection. After the parking mode is enabled, you can
choose to enable one of the parking modes.
Note:
1. To ensure the camera works properly in park mode,
please use the hardwire kits or other stable and continu-
ous power supply to power the dash cam.
2. The best working environment temperature of M3 is
14-122°F (-10°C to 50°C). We recommend using collision
detection within this temperature range, so once the
temperature exceeds the normal working temperature
range, it will automatically shut down. If the temperature
is high, please turn off the camera when parking.
4.12.1 Collision Detection
When the collision detection is turned on, the P icon
appears in the center of the screen, and then the dash
cam is automatically turned off. When the dash cam is
turned off, it will start to record for 1 minute after being
shaken, and then turn off the dash cam again.
Low-light Night Vision On
- 18 -