Defrosting The Cooling Box; Replacing The Ac Fuse; Replacing The Dc Plug Fuse - Dometic CFX-Serie Bedienungsanleitung

Operation
7.11

Defrosting the cooling box

Humidity can form frost in the interior of the cooling device or on the evaporator. This
reduces the cooling capacity. Defrost the device in good time to avoid this.
A
NOTICE! Damage hazard
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooling box, proceed as follows:
1. Take out the contents of the cooling box.
2. If necessary, place them in another cooling device to keep them cool.
3. Switch off the device.
4. Leave the lid open.
5. Wipe off the defrosted water.
7.12

Replacing the AC fuse

D
DANGER! Electrocution hazard
Disconnect the power supply and the connection cable before you
replace the device fuse.
1. Disconnect the power supply to the device.
2. Pull off the connection cable.
3. Pry out the fuse insert (fig. 4 2, page 4) with a screwdriver.
4. Replace the defective glass fuse with a new one that has the same type and rat-
ing (4 A, 250 V).
5. Press the fuse insert back into the housing.
6. Reconnect the power supply to the device.
7.13

Replacing the DC plug fuse

1. Unscrew the contact pin housing (fig. 8 3, page 5) from the plug (fig. 8 1,
page 5).
2. Replace the defective fuse (fig. 8 2, page 5) with a new fuse of the same type
and rating (3AG, Fast Acting, 10 A).
3. Re-assemble the plug in reverse order.
20
CFX
EN