Electrolux EXP26U339AW Benutzerhandbuch Seite 15

Fan Mode
In this mode, there is no need to use the
exhaust hose or drainage hose.
1. Press the "MODE" button until the Fan
mode indicator is lit.
2. Press the "Fan speed" button to choose
the desired fan speed.
3. The fan will run at the selected speed
and the display will show the room
temperature.
Note: Fan speed can not be changed in
Auto mode or Dry mode.
Auto Mode
Always have the exhaust hose attached in
this mode.
When you set the air conditioner in Auto
mode, it will automatically select cooling,
heating (inapplicable for cooling only
models), or fan only operation depending
on what temperature you have selected and
the room temperature. The air conditioner
will control room temperature automatically
to achieve the desired temperature.
In Auto mode, you cannot select the fan
speed.
1. Press the "MODE" button until the "Auto
mode" indicator illuminates.
After "Auto mode" is selected, the unit will
run automatically according to the actual
room air temperature.
Timer Mode
The timer can be used to schedule the start
and end of operation.
• How to delay startup
Plug in the unit, so the unit turns to standby.
Press the "Timer" button, then the timer
indicator will be on and the number of hours
on the screen will show "0.0". Tap or hold
the PLUS "+" or MINUS "-" to change the
delay start timer at 0.5 hour increments up
to 10 hours, then at 1 hour increments up
to 24 hours. Press the "Timer" button again
within 5 seconds, you will quit the timer
setting directly.
After 5 seconds, the timer function is
enabled and the timer indicator will be
lit. The control will count down the time
remaining until startup. The unit will start up
in the mode as previously set.
To cancel the setting, press the "Timer"
button again, and the display will show the
remaining time. Press the "Timer" button
again to cancel, the timer indicator will
be off. You can also cancel the setting by
pressing the "on/off" button.
• How to delay shutdown
You can delay shutdown when the unit is
on.
Press the "Timer" button, then the timer
indicator will be on and the number of hours
on the screen will show "0.0". Tap or hold
the PLUS "+" or MINUS "-" to change the
delay stop timer at 0.5 hour increments up
to 10 hours, then at 1 hour increments up
to 24 hours. Press the "Timer" button again
within 5 seconds, you will quit the timer
setting directly.
After 5 seconds, the timer function
is enabled, the display will show the
temperature back again and the timer
indicator will be lit. The control will count
down the time remaining until the shutdown.
To cancel the setting, press the "Timer"
button again, and the display will show the
remaining time. Press the "Timer" button
again to cancel, the timer indicator will
be off. You can also cancel the setting by
pressing the "on/off" button.
Sleep Mode
Activating this feature will give you a
comfortable temperature and help save
energy.
Only when the unit is in Cool, Heat or Auto
mode, you can press the "sleep" button to
make the unit run in Sleep mode.
Louver Swing Function
Press the "Louver swing" button to enable
louver swing function, the louver on the top
panel will swing up and down.
Press this button again to disable the louver
swing function.
Filter Reset
This indicator is a reminder to clean the Air
Filter (See Care and Cleaning) for more
efficient operation.
The filter indicator will illuminate after 250
hours of operation. To reset after cleaning
the filter, press the "filter reset" button, then
the "filter" indicator will go off.
Child Lock
Turn on child lock by pressing the "MODE"
button for 5 seconds, until the display shows
"LC." To turn off child lock, press the "MODE"
button again for 5 seconds.
WiFi
The unit is equipped with a WiFi module.
When the unit is connected to the home
WiFi, this icon " " will light up. If the icon is
blinking, it indicates a temporary loss of
WiFi connectivity - please refer to the
Electrolux App for more details.
ENGLISH 15