Machine Information - BRUKSBO LX system 20V Bersetzung Der Originalbetriebsanleitung

batteries may exhibit unpredictable behaviour
resultinginfire,explosionorriskofinjury.
f) Do not expose a battery pack or tool to
fire or excessive temperature. Exposure to
fireortemperatureabove130°Cmaycause
explosion.NOTEThetemperature„130°C"
canbereplacedbythetemperature„265°F".
g) Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperaturesoutsidethespecifiedrangemay
damagethebatteryandincreasetheriskoffire.
h) The supplycord of the charger cannot be
repaired. If the supplycord is damaged the
product shall be scrapped.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
Additional safety warnings for orbital
sanders
Contact with or inhalation of dust coming
free during use (e.g. lead-painted
surfaces, wood and metal) can endanger
your health and the health of bystanders.
Always wear appropriate protective
equipment,suchasa dustmask.Always
use proper dust extraction during use.
• Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
• Do not use the machine for sanding
magnesium workpieces.
• Wear safety goggles. Wear hearing protection.
If necessary, use other protective means, such
as safety gloves, safety shoes, etc.
• Hold the machine by the insulated gripping
surfaces where the accessory may contact
hidden wiring or the mains cable. If the
accessory contacts a ‚live' wire, the exposed
metal parts of the machine can also become
‚live'. Risk of electric shock.
• Be very careful when sanding painted surfaces.
6
• Before use, remove all nails and other metal
objects from the workpiece.
• Make sure that the workpiece is properly
supported or fixed.
• Only use sanding paper that is suitable for use
with the machine.
• Only use sanding paper with the correct
dimensions. Make sure that the sanding paper
is properly mounted.
• Inspect the sanding paper before each use. Do
not use sanding paper that is worn because of
prolonged use.
• Never put the machine down on a table or
a workbench before it has been switched off.

2. MACHINE INFORMATION

Intended use
The machine is designed for sanding wood,
plastics and metal. This machine is suitable only
for dry sanding. The machine is not suitable for
processing objects containing asbestos. Improper
use may damage the tool.
Technical specifications
Model No.
Voltage
No load speed
Sanding pad diameter
Weight
Sound pressure level LPA
Sound power level LWA
Vibration
Only use the following batteries of the LX system
20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CDA1180 20V, 2Ah Lithium-Ion
CDA1181 20V, 4Ah Lithium-Ion
The following charger of the can be used to
charge these batteries.
CDA1183 Charger adapter
CDA1182 Quick charger
The batteries of the LX system 20V battery
platform are interchangeable with all the Bruksbo
LX system battery platform tools.
ESM1016
20V
5.000-10.000/min
125mm
1.20 kg
77.1 dB(A), K=3dB(A)
88.1 dB(A), K=3dB(A)
7.511 m/s K=1.5 m/s
2 2