4.2 Control panel: operating buttons and indicators of the display
WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
Operate the appliance according to the instructions about the control of the
functions and modes described in the following paragraphs.
The modes as well as the temperatures of the individual compartments (fridge,
freezer) can be set manually as required (s. chapter 5.3 T
seq.).
The
SMART MODE
S
).
MART MODE
During normal operation (display is on), the display indicates the current set
compartment (fridge or freezer) and the corresponding set temperature in degrees
Celsius (°C).
Without using any operating buttons the control panel will be locked
automatically after some time and the operational status indicator of the C
«
SAFETY LOCK
temperatures or modes, you must always press and hold the « M
» -
for 3 seconds to unlock the operating buttons (see also chapter 5.2
BUTTON
C
HILD SAFETY LOCK
In case of a malfunction the temperature indicator displays the respective error
code (s. chapter 8.1 E
is the default setting of the appliance (see also chapter 5.4.3
C
ONTROL PANEL AND DISPLAY
» goes on. Before you can carry out further settings of the
).
).
RROR CODES
~
~
73
EMPERATURE SETTING
/ U
ODE
NLOCK
et
HILD