Alarm Setting - Roadstar TTR-8850ED+BT Bedienungsanleitung

English 3

ALARM SETTING

Long press the [MENU/INFO] button (13),to enter the main menu, then turn the
[TUNING/SELECT] button (14) to choose 'System' and press to select.
In System setting menu, turn the [TUNING/SELECT] button (14) to choose 'Alarm
clock setting' and press to enter the sub-menu.
The machine allows two alarm settings: "Alarm 1 Info." and "Alarm 2 Info."
Using "Alarm 1 info." as an example, set it as follow:
Alarm: Alarm off(default)/alarm on
Frequency: Daily/Once/Weekends/Weekdays
Wake up time: xx : Hour flashes. Adjust by turn the [TUNING/SELECT] button (14)
dial and short press [TUNING/SELECT] button (14) to confirm.
Minute flashes. Adjust by turn the [TUNING/SELECT] button (14) and short press
[TUNING/SELECT] button (14) to confirm the time and return to the Alarm menu.
Source: Buzzer (default)/FM,/DAB. If the Source is the same as the current Mode,
the Buzzer will be used for contrast. If DAB is selected and no DAB station can be
found, Buzzer will be used instead.
Duration: 15/30/45/60/90/120. Set the duration of the alarm in minutes.
Volume: Adjust the alarm volume.
Turn back with [MENU/INFO] button (13) repeatly.
TURNTABLE OPERATION
Select "PHONO" mode by pressing the [MODE] button (16) repeatedly;
Place a record on the turntable. Place the EP adapter over the central spindle when
playing 45 rpm records;
Set the [SPEED SELECTOR] (6) to 33, 45 or 78 rpm according to the record;
Release the tonearm clamp, and remove the stylus protector;
Lift up the [TONEARM] (7) with the [LIFT LEVER] (4);
Move the [TONEARM] (7) to the beginning of the record;
Lift down the [TONEARM] (7) with the [LIFT LEVER] (4)
When the record is finished the plate will automatically stop turning. To stop manually,
lift up the tonearm from the record and return it to the rest support.
Note: Do not stop or turn the plate manually.
When the unit is moved or transported: Lock the [TONEARM] (7) with the tonearm
clamp. Place the protective cap on the stylus (even when not in use).
DAB RADIO
In DAB mode, long press the [SCAN/PLAY] Button (23) for about 3 seconds, LCD
Display will show "Scanning...".
The unit starts searching for radio stations, displays the scanning speed and the radio
stations found during the scanning process. Once the search is completed, the first
station in the search list will be played automatically.
After the station search is completed, the unit will playing the first station automatical-
ly, turn the [TUNING/SELECT] button (14) to select the station you want to play in the
station list, then press the [TUNING/SELECT] buttons (14) to confirm the station.
MUTE: Short press [SCAN/PLAY] button (23) for mute, short press again to restore
the volume.