Explanation Of The " " And " " Symbol - Blaupunkt P3PM2T2 Bedienungsanleitung

Explanation of the " " and "
Users must check the PE detection mark "
(PE meaning protective conductor)
1.If the Mark " " is displayed on the screen, it indicates that the charger shall verify
the presence of the upstream PE, and the charging process will only begin when
the upstream PE is present.
ATTENTION: if the mark "
detected and the charging cannot be started.
2.If the Mark " " is NOT displayed on the screen, it indicates that the charger has
no function to verify the presence of the upstream PE, and can be charged
whether or not the PE can be detected.
ATTENTION: It is strongly recommended that users charge under condition 1.
Condition 2 has certain security risks due to the absence of PE. So Condition 2
should only be used under the premise that users can ensure safety and in
special circumstances where PE does not exist in the power system.
Deactivate PE Detection :
Reactivate PE Detection:
05
" symbol
" on the display before each use.
" appears, it means that the upstream PE has not been
Press "Amps+Time" for 4s together.
Press "Amps+Time" for 4s together.