Supported Software - DFI PE21-EC Benutzerhandbuch

2.3 Supported Software

2.3.1 VIA Service Pack
The CD in the mainboard package also comes with the VIA Service
Pack. The service pack includes the following drivers.
• VIA ATAPI Vendor Support Driver
• AGP VxD Driver
• IRQ Routing Miniport Driver
• VIA INF Driver
To install the drivers, insert the CD into a CD-ROM drive. The
autorun screen (Main Board Utility CD) will appear. Click the "VIA
Service Pack" button. For installation instructions or information, click
the "Read Me" button in the autorun screen.
VIA Service Pack Installation Notes
The "AGP VxD Driver" and "VIA INF Driver" drivers in the "VIA
Service Pack" are supported in Windows
®
Windows ME and Windows
You must first install the VIA Service Pack prior to installing any
other drivers. However, this may not be the case for some AGP
cards. Please read carefully the following information.
Important:
The VGA driver that came with some AGP cards is already
bundled with the AGP VxD driver. Since the version of the
bundled VxD driver may be older than the one provided in the
CD, installing the bundled VxD driver may cause problems. If
you are using this type of card, we recommend that you install
first the AGP card's VGA driver before installing the VIA Service
Pack.
To install the VIA Service pack, please follow the steps below.
1. Insert the CD that came with the mainboard package into a
CD-ROM drive. The autorun screen (Main Board Utility CD) will
appear.
2. Click "VIA Service Pack".
®
98, Windows
®
2000.
2
English
®
98 SE,
45