Maintenance; Defrosting The Appliance - ETNA VS6102NF Bedienungsanleitung

Maintenance

Defrosting the appliance

Defrosting a NoFrost freezer
The NoFrost freezer defrosts automatically. Any frost deposits will then disappear.
Any ice or frost deposits that nevertheless form in the freezer compartment can be caused by unusual
use of the appliance (opening the door too often and too long or poorly sealing door, etc.). The freezer
will then need to be defrosted manually.
WARNING!
Switch off the appliance in the event of extreme ice formation. Remove the food in the freezer
and protect it so that it cannot partially or completely thaw. Clean and dry the interior of the
freezer. Switch on the appliance and adjust the temperature to the required setting before you
put the food back into the freezer.
WARNING!
Do not use any defrosting sprays as they may melt the plastic parts or harm your health.
WARNING!
Do not use a knife or any other sharp object to remove the frost, because you may damage a
pipe of the cooling system.
22