Video Cable For Control Teletext Module C, Color - HEIDENHAIN BC 110BF Betriebsanleitung

Overview of video cables | Video cable for control teletext module C, color
16.2

Video cable for control teletext module C, color

Color operation is possible with:
Contr. telet. module C
You can use the existing video cable of your machine. The monitor is compatible
with the old pin layout.
For your new cable please use a well-shielded 10-pin computer cable.
Cable type:
Length:
"Free" pins must not be assigned
With some controls, the shield must additionally be connected to
the ground bar of the control; see commissioning instructions of the
control
The signal ground (Sig. GND) must not be connected to the shield
Only use shielded connector housings
Your cable should only be as long as necessary, with a little allowance
for mounting and dismounting the monitor
HEIDENHAIN | User's Manual TFT-Monitor 12,1" | 06/2022
4022 226 3432 and 4022 226 3433
5 x 2 x 0.14 mm²
max. 25 m
68