Removing And Emptying The Water Tank - ProBreeze PB-06 Bedienungsanleitung

CONNECTING THE WATER HOSE FOR CONTINUOUS DRAINING
For long-term use, it is recommended to connect a
hose for continuous drainage. To attach the hose:
Remove the plug from the water hose
1.
connector located on the back of the
dehumidifier.
Insert the hose into the water hose
2.
connector and check it is connected
properly.
Ensure the hose end has a suitable
3.
drainage outlet (e.g. a drain or bucket).

REMOVING AND EMPTYING THE WATER TANK

When the water tank is full 10 beeps will sound; the
Water Tank Full indicator light will illuminate, and the
dehumidifier will pause operation to prevent the water
tank from overflowing. To remove and empty the water
tank:
Turn off the dehumidifier and unplug
1.
it from the wall socket.
Gently pull the water tank out from
2.
the front of the dehumidifier.
Empty the water tank.
3.
Once empty, slot the tank back in
4.
carefully.
English | 8