Symbols On The Product - SMA SUNNY TRIPOWER STORAGE X 30 Schnelleinstieg

SMA Solar Technology AG
Damage to the inverter due to switching operations on the transformer
If voltages are present in the inverter, switching operations on the transformer can lead to large
fluctuations in the voltage in the inverter. Large fluctuations in voltage can damage components
in the inverter.
• Disconnect the inverter from voltage sources before performing any switching operations on
the transformer.
Damage to the product due to cleaning agents
The use of cleaning agents may cause damage to the product and its components.
• Clean the product and all its components only with a cloth moistened with clear water.
Damage to assemblies caused by impact from test probes
When measuring voltages in the inverter, test probes must be used at measuring points within
assemblies. The use of test probes may damage the assemblies.
• Test probes are to be used only at measuring points specified in this document. Other parts
(e.g. components) must not be touched.
• Always move the test probes in the inverter slowly and carefully.
3

Symbols on the Product

Icon Explanation
Beware of a danger zone
This symbol indicates that the product must be additionally grounded if addi-
tional grounding or equipotential bonding is required at the installation site.
Beware of electrical voltage
The product operates at high voltages.
Beware of hot surface
The product can get hot during operation.
Danger to life due to high voltages in the inverter; observe a waiting time of 5
5 min
minutes.
High voltages that can cause lethal electric shocks are present in the live com-
ponents of the inverter.
Prior to performing any work on the inverter, disconnect it from all voltage
sources as described in this document.
Quick Reference Guide
NOTICE
NOTICE
NOTICE
3 Symbols on the Product
STPSxx-20-IS-xx-11 11