Cleaning & Storage; Recycling & Disposal - ProBreeze PB-02 Bedienungsanleitung

SWITCHING ON
― ―
1. Remove the power adapter from the box
and attach it to both the dehumidifier
and main wall socket.
2. Switch the dehumidifier ON using the
ON/OFF switch. The green LED will
illuminate and you should feel a light
breeze blowing out of the dry air outlet.
3. To switch OFF, press the ON/OFF switch
again.
REMOVING THE WATER TANK
― ―
When the water tank is full, the LED light
will turn yellow and the dehumidifier will turn
off. To empty the water tank, make sure the
dehumidifier is off and gently pull out the
water tank. Remove the black plug from the
top of the tank. Pour the water out by tilting
the tank until it is completely empty. Firmly
place the black plug back into the hole.
Please do not try to remove the white lid of
the water tank. Carefully slot the water tank
back into the dehumidifier.
The water tank can hold a maximum of 500
ml (18 fl oz) of water. Your dehumidifier can
collect up to 250 ml (9 fl oz) of water per day
in its ideal environment, which is 30°C (86 °F)
and 80 % relative humidity.
4 | English
CLEANING & STORAGE
― ―
WARNING: ALWAYS TURN THE
APPLIANCE OFF, UNPLUG
THE POWER CORD FROM THE
ELECTRICAL OUTLET BEFORE
HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR
OTHER LIQUIDS TO RUN INTO THE
INTERIOR OF THE APPLIANCE, AS
THIS COULD CREATE A FIRE AND/OR
ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY
ABRASIVE CLEANERS OR SOLVENTS,
AS THIS CAN DAMAGE THE
APPLIANCE.
• Do not attempt to clean the appliance in
any other way than that detailed by the
manufacturer.
• Empty the water tank prior to transport
and storage.
• Clean the exterior surface of the
appliance by wiping it with a soft, damp
cloth. Dry the appliance with a soft,
clean cloth.
• Always empty the water tank, clean and
dry the appliance when not in use to
prevent mould.
• Store in a clean, dry place away from
direct sunlight. Place out of reach of
children.
• To store your product, we recommend
using the original or a similar sized box.
• Ensure the appliance and water tank are
clean and dry before storage.
Cleaning the water tank:
• Remove and empty the water tank as
per the instructions above.
• Clean the water tank with warm tap
water and mild detergent (e.g. washing
up liquid).
• Ensure to remove any scale or deposits
that have formed inside the water tank.
• Wipe all surfaces dry before placing the
water tank back into the appliance.
• Do not use boiling water to clean the
water tank.
SPECIFICATIONS
― ―
• Operating Capacity: Approx 250ml (9oz)
per day at 30°C (86°F), 80%
• Cooling Element: Thermo-Electric Peltier
Module
• Fan: 80mm x 80mm Brushless Motor
• Power: DC9V 2.5A
• Max Tank Capacity: 500ml (18oz)
RECYCLING & DISPOSAL
― ―
The packaging of your new product has a
recycle mark on it. Please dispose of it as
recycled paper. Waste electrical products
should not be disposed of with general
household waste. This is to prevent the
possible harm to the environment and human
well-being. Contact your local council or
government for information regarding the
collection schemes in your area.
English | 5