Jevi DELTA 3000 Anleitung Seite 5

GB
Fan Heaters
(Original instruction)
which may be used in bathrooms,
the fan heater must be installed thus
power switch and other controls
cannot be reached from the bathtub
or cabinet shower. The fan heaters
must not be placed near flammable
objects. See fig. A. (The distances
are min. distances.)
If supply cord is damaged, it must be
replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
Portable fan heaters:
Do not use this heater in the
immediate surroundings of a bath, a
shower or a swimming pool.
Do not use this heater if it has been
dropped.
Do not use if there are visible signs
of damage to the heater.
Use this heater on a horizontal and
stable surface, or fix it to the wall, as
applicable.
Portable fan heaters are only suitable
for well insulated spaces or
occasional use.
DELTA 3000, 3000T, 6000,
6000T, 9000, 9000T (A)
These fan heaters are suitable for
fixed and portable use. The heaters
are IPX4 and can be used in dry and
humid rooms.
Overheating Protection for A
The fan heaters have a thermal
cut-out which disconnects the supply
if the motor fails or if overheating
occurs. After cooling down the fan
heater, reset can be done with a
screwdriver through the hole in the
instrument panel. If the fan heater
does not start after re-connection
you should contact manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazord.
DELTA 15000, 15000T (B)
DELTA fan heaters are suitable for
portable use or can be installed
permanently at a height of at least
1,8 meters. The heaters are IPX4
and can be used in dry and humid
rooms.
DELTA 21000, 21000T (B)
Must only be used as fixed fan
heater and installed at a height of at
least 1,8 meters. This fan heater is
delivered with wall mounting fix and
without plug for the cable.
The heaters are IPX4 and can be
used in dry and humid rooms.
Overheating Protection for B
The fan heaters have a thermal
cut-out which disconnects the supply
if the motor fails or if overheating
occurs. If the fan heater does not
start after re-connection, you should
contact an electrician. See fig. C for
disassembly of the housing.