ECG EWF 601000 BlackLine Bedienungsanleitung Seite 17

We recommend using this option only if you are washing less than half of the maximum dry load for the
selected programme Select this function by pressing the Quick Wash button when the
Note: If you put less than half the maximum amount of laundry in the washing machine, the washing machine
will automatically set the half load function, regardless of the selected program. This means that it takes
less time to complete the selected program and uses less water and energy. If your washing machine
detects half a load, the
No Spin*
If you don't want to spin the clothes, you can use this additional function. When the
can activate the programme by pressing the No Spin button.
Cold Wash*
You can use this auxiliary function when you want to wash clothes in cold water (tap water). When the
symbol lights up, you can activate the programme by pressing the Cold Wash button on the display panel.
Start/Pause button (button 4)
To start the selected program, press the Start / Pause button.
When you switch the washing machine to standby mode, the Start / Pause light flashes on the display.
Child lock (buttons 2 and 3 simultaneously)
The Child Lock function allows you to lock the buttons
so that the selected wash cycle cannot be accidentally
changed.
To activate the child lock, press and hold buttons 4
and 5 simultaneously for at least 3 seconds. When the
child lock is activated, "CL" lights up on the display for
2 seconds.
If you press any button or change the selected
programme using the programme selector when the
child lock is active, the "CL" symbol will light up on the
display for 2 seconds.
If the washing machine is already washing, the child lock is active and you try to change the program by
turning the program selector to the CANCEL position and then to the required program, the washing machine
will continue to operate without change.
To deactivate the child lock, press and hold buttons 4 and 5 simultaneously for at least 3 seconds until the "CL"
symbol disappears from the display.
Cancelling program
The selected program can be canceled at any time:
1. Set the program selector to the "STOP" position.
2. The washing machine stops the wash cycle and the program is cancelled.
3. Drain the water from the washing machine by turning the PROGRAM selector to any other program.
4. Your washing machine will drain the water and cancel the program.
You can now select and start a new program.
symbol will automatically appear on the display.
symbol is displayed.
symbol lights up, you
17