Pkm EBO6-45 Bedienungsanleitung Seite 79

2. Place a dishcloth in the interior of the cold oven to protect it from possible
damage.
3. Unscrew the lamp cover anticlockwise (s. fig. below). Clean the lamp cover and
wipe it dry thoroughly.
4. Unscrew the illuminant from the socket (s. fig. below) and replace it with a high
temperature illuminant (300 °C) of the same type: Voltage 230 V / Power 25 W.
Do not use any other type of illuminant.
5. Screw the new illuminant in. Check its proper position in the socket.
6. Replace the lamp cover.
7. Remove the dishcloth and switch on the corresponding fuse in the fuse box of
your household power supply again.
According to the EU regulation No. 244/2009, your appliance is classified as a
household appliance in accordance with the eco-design requirements for non-
directional household lamps. This means that illuminants, which are used in
household appliances, must not be used to illuminate domestic establishments.
NOTICE! Any damage that is caused to your appliance by improper
removal or installation of the illuminant will not be fixed free of charge,
even if the guarantee period of the appliance is still valid.
~ ~
79