AquaForte PRIME VARIO Bedienungsanleitung Seite 16

LED Error code and APP Error description:
When the controller work abnormal, the controller will show the Error code and warning flashing, when enter the APP will pop-
up the mention box. the code explanation as below.
APP mention and error code:
APP prompt
Controller over current
Controller over temperature
Pump idiling
The pump was blocked
Controller over voltage
Controller under voltage
WiFi module and motherboard
communication failure
6. MAINTENANCE
If the pump is not working, check as following:
• Connect with another power outlet to check if the circuit is connected, disconnect the power before operation;
• Check the pump inlet and outlet, check the connecting pipe for any dirt blockage;
• Remove the pump inlet to access the impeller. Turn around the rotor to check if broken or jammed.
• Monthly maintenance will prolong your pump life. Clean the rotor, remove the dirt etc.
• The power cord of the pump must be under the power socket to form a drip ring to prevent water into the power socket
along the power cord
7. DISPOSAL
Please don't dispose this product as unsorted municipal waste. Collection of such waste separately for special
treatment is necessary. Not put it together with the domestic waste which should be solved as an authorized
place for recycling of electrical and electronic appliances for collecting and recycling waste. Please consult
with your local seller, to make sure the product is disposed in an environmental and healthy way.
16
AQUAFORTE PRIME VARIO WIFI PUMP VERSION 1.05 07/2022
LED panel
Er01
Er02
Er03
Er04
Er05
Er06
Exception to rule out
Abnormality Working current; Check
if the pump is short of voltage or the
controller is broken.
Check whether the controller is
exposed to sunshine or in high
temperature environment.
The pump is idiling. Check whether
the pump works dry. The pump must
be filled with water before operation.
The impeller stops running, clean
the pump and impeller to ensure the
impeller is clean and works.
Check the input supplying voltage.
Bad contact between motherboard
and module, communication part
damage