3.3.2 Transport; 3.3.3 Work On The Electrical System; Operation - HUPFER Therma Dry WHB TD-Serie Betriebsanleitung

Operating instructions
4

Operation

3.3.2 Transport

If the equipment needs to be lifted, only use lifting gear and load-
bearing equipment approved for the total weight of the equipment.

3.3.3 Work on the electrical system

Work on electrical systems may only be carried out by electricians.
The work must be carried out in compliance with the rules of electrical
engineering.
WARNING
Hot surface
When the appliance is switched on, its surfaces may exceed the
65°C maximum permitted temperature for touching. Touching them
can lead to burns.
−
Wear suitable hand protection when loading and unloading the
heated wells.
WARNING
Hot infrared lamps
If the appliance is equipped with a gantry lamp module, the infrared
lamps installed in the gantry are very hot. Touching them can lead to
burns.
−
Do not touch the infrared lamps.
Therma Dry heated well
11 / 20