Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.5 Lighting
With respect to the lighting you can choose between the
cooking mode and the mood mode. The light workt inde-
pendent of the motor.
Cooking mode
The cooking mode provides optimum lighting for cooking.
Press key
or
key to switch the cooking mode on or off.
Cooking mode light intensity
When the cooking mode is active, you can dim or intensify
the light by pressing
. Release key
light intensity has been reached.
You cannot fully dim the light of the cooking
mode, because then there will not be sufficient
light to cook.
Change the colour temperature in the cooking mode
You can change the colour temperature into cold light by
simultaneously pressing keys
Release both keys when the required colour temperature
has been reached.
You can change the colour temperature into warm light by
simultaneously pressing keys
Release both keys when the required colour temperature
has been reached.
After having switched off the cooking mode, the last set
value will always be remembered. In this way your prefer-
ence will be used every time when switching on the hood.
Mood mode
The mood mode provides optimum lighting for creating a
nice atmosphere. Press key 5 to switch the mood mode
on or off.
Mood mode light intensity
When the mood mode is active, you can dim or intensify
the light by pressing and holding key 5. Release key 5 when
the required light intensity has been reached.
Change the colour temperature in the mood mode
You can change the colour temperature into cold light
by simultaneously pressing keys 5 and
Release both keys when the required colour temperature
has been reached.
You can change the colour temperature into warm light by
simultaneously pressing keys 5 and
for 4 seconds. Release both keys when the required colour
temperature has been reached.
After having switched off the mood mode, the last set value
will always be remembered. In this way your preference will
be used every time when switching on the hood.
when the required
and
for 4 seconds.
and
for 4 seconds.
for 4 seconds.
and holding them
– 37 –
2.6 Programming recirculation (optional)
This unit can be used in duct out mode (factory setting) or
recirculation mode. If recirculation is selected, a onetime
programming in the Novy Connect application via a mo-
bile device is needed to make the appliance suitable for
recirculation. The motor must be switched off.
With this programming, the following functions are activated:
− The replacement indicator of the monoblock filter is ac-
tivated. After a fixed time, an orange indicator LED on
the cooker hood shows that the monoblock filter needs
to be replaced.
− The time in delay mode is set to 30 minutes (instead of
the standard 10 minutes).
Make use of the delay time of 30 minutes so
that the cooking odours can be absorbed well
in the monoblock filter.
Read section 3.4 for more information on replacing the
monoblock recirculation filter.
This programming can also be deactivated with the Novy
Connect application.
The motor must be switched off. After deactivation, the
delay time is set to 10 minutes (instead of 30 minutes) and
the replacement indication for recirculation is switched off.
2.7 Remote control
The remote control for hood is preinstalled and ready for use.
If the power is disconnected from the unit and
switched on again, wait 3 minutes before using
the remote control. This prevents the code from
being changed so that the unit does not re-
spond to the remote control or so that another
unit is not connected to the remote control.
Change the code on the remote control
If the set code disrupts other transmitters, another code
can be selected using the remote control. There are 10
different codes.
Determine the code used
Simultaneously press
and
control flashes as many times as the selected code (there
are 10 code options in total).
. The lamp on the remote
Werbung
Inhaltsverzeichnis
