BATTERY-POWERED POCKET-SIZE 3W RGB LED & LASER EFFECT
FEATURES
The super-compact housing contains an RGB LED and a laser powered by a battery that recharges via the in-
cluded DC-USB lead. Easy to carry, this pocket-sized effect will set the mood wherever you are.
•
1x 3W 3-in-1 RGB LED
•
160mW RGB Laser
•
Automatic, music or remote-controlled operation
•
Rechargeable battery via the supplied DC-USB lead
•
Remote control
EXPLANATION OF SYMBOLS
The unit complies with UK standards
For indoor use only
Don't stare into the light beam
Don't stare into the laser beam
IMPORTANT INSTRUCTIONS REGARDING LASERS
•
Laser device compliant with EN60825-1: 2014
•
This is a class 3R laser, direct exposure may be harmful to the eyes
•
The use of this outgoing laser device is reserved for a specific use of
show or display.
•
The device must be installed so that the rays remain above the public
•
The device must be firmly fixed to prevent it from falling or changing the
orientation of the angle of the rays.
•
Any risk of accidental reflections of the beams (mirrors, magnifying
glass, objects, obstacles, walls, etc.) must be avoided.
•
The device may only be used for the purpose for which it is intended, any other use is prohibited.
•
Never look at the beam directly, exposure can be dangerous for the eyes
•
The device must never be opened. Only the manufacturer is authorized to open the device, for class 3R laser
service
•
Only external cleaning of the device is authorised, for this the device must first be unplugged.
IMPORTANT SAFETY INSTRUCTIONS AND DANGER WARNINGS
•
Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
•
Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also
receives this instruction booklet.
•
This product is intended for indoor use only!
•
To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
•
The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces.
Be sure that no ventilation slots are blocked.
•
Secure fixture to fastening device using a safety chain.
•
Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than
this.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the near-
est authorized technical assistance center. Always use the same type of spare parts.
•
The light sources of the light effects are not replaceable. If a light source is faulty, the light effect must be
discarded.
2
Manual - TINYLED-LASRGB
INSTRUCTION MANUAL
©Copyright LOTRONIC 2023
CAUTION
LASER
3R
AVOID EXPOSURE TO BEAM
EXPOSITION AU FAISCEAU DANGEREUSE
EN60825-1 : 2014
IEC 1072/14