diversey TASKI ULTIMAXX 900 Bedienungsanleitung Seite 96

Dosing:
Warning:
Wear gloves, goggles and appropriate (protective)
working clothes when handling chemical products!
Danger:
Use chemical products recommended by Diversey
only and always observe the product information.
Using unsuitable products (e.g. products containing
chlorine, acids or solvents) may cause harm to health
and severe damage to the machine.
Notice:
For a precise dosing, use the scale in the dosing
cup.
- The filling level mark on the tank corresponds to the
mark in the dosing cup. The type of machine is also
noted in the dosing cup!
Information on Tank capacity
the package of
the product
0.5% 1/2
MAX
1% 1/2
MAX
Dosage cup application
• Fill the product you have measured
with the dosage cup into the fresh
water tank.
• Slightly lift the tank cover.
• Swivel the folding stand back into the holder.
• Close the tank cover.
• By pushing gently on the front part of the tank cover you
lock the tank.
Automatic dosing (optional)
Notice:
TASKI offers an automatic dosing (IntelliDose) fea-
ture as an option. It is possible to mount it addition-
ally.
- Please contact your customer service.
IntelliDose fill / empty
• Open the automatic dosing cover
and remove the concentrate bag.
94
Dosage cup
1 x 1/2
1 x MAX
1 x MAX (2 x 1/2)
2 x MAX
• Press and hold the IntelliDose button
(see page 89) for 2 seconds.
• Press again the IntelliDose button in
order to get to the setting for empty-
ing the system.
• Confirm the start of emptying by
pressing the right service button.
• Insert the new concentrate bag and
close the cover of the automatic dos-
ing.
• Fill the system by pressing the Intel-
liDose button.
• Filling the system takes about 18.
seconds.
Notice:
The IntelliDose is now ready for use.
- Note the settings for concentrate and high concen-
trate in the following section.
Setting concentrate and high concentrate
• Press and hold the Eco-Mode and Cleaning solution supply
button (see page 89) for 2 seconds.
The power user menu appears in the display.
• Press again the Eco-Mode button in order to get to the set-
ting between concentrate and high concentrate.
• The Cleaning solution supply amount buttons can be used
to select between concentrate (0.2% - 0.5%) and high con-
centrate (1% - 2.5%).
• Press the Cleaning solution supply button to confirm the
selection.
IntelliDose dosing settings
• Press and hold the IntelliDose button for 2 seconds.
In the display, appear the menu for setting the dosage.
• With the service buttons, the dosage can be set according
to the preferences of the concentrate.
• By pressing the IntelliDose button again, the settings are
confirmed.
Pre-cleaning
Warning:
Remove any objects (wooden, metal parts etc.)
from the cleaning surface.
The objects could be catapulted by the rotating tool, and
thereby cause injuries to people and damage to the en-
vironment.