Adjusting the plant control plate
The plant control plate stops the seedlings falling down-
wards before they are ejected.
Move the plate down for smaller seedlings and up for
taller seedlings.
Proceed as outlined below.
1) Loosen the nut (A).
2) Adjust the plate (B) as required.
3) After adjustment, tighten the nut (A).
Planting depth adjustment
Proceed as outlined below.
1) Use the lock (B) to release the knob (A).
2) Turn the knob (A) to increase or decrease the depth
of the furrow.
3) After adjustment, tighten the nut to secure the knob
with the lock (B).
Adjusting the small wheel load
Proceed as outlined below.
Turn the knob (A) clockwise to increase the load of the
small wheel (B) on the ground.
Turn the knob anticlockwise to decrease the load of the
small wheel on the ground.
English language
ADJUSTMENT INFORMATION
A
B
UN41 0175LG
B
UN41 0176LG
UN41 0177LG
19
5
A
A
B
Use and maintenance