Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
13.
Natural mode indicator
14.
Oscillation indicator
REMOTE CONTROL
― ―
The remote control can be used within five
metres from the front of the device. Make
sure that the remote control points to the LED
display when operating.
1.
Power button
2.
Oscillation button
3.
Mode button
4.
Increase button
5.
Humidification button
6.
Decrease button
7.
Timer button
Note: Two AAA batteries included.
OPERATING INSTRUCTION
― ―
Power Button
Press once on the control panel or remote control to turn the device on or off.
Oscillation Button
Press once on the control panel or remote control to start or stop vent oscillation.
Mode Button
Press the Mode Button to switch between the three modes available:
1.
Fan Mode: In Fan Mode, the device will produce a consistent wind speed. There are four
speed settings available. Press the increase or decrease button to choose the desired fan
speed.
2.
Natural Mode: Natural Mode is designed to mimic wind by automatically transitioning
through the available speeds to create a natural air flow. There are two speed settings
available. Press the increase or decrease button to choose the desired fan speed.
3.
Night Mode: In Night Mode, the fan speed will automatically reduce after 30 minutes to
lower energy consumption and noise. There are two speed settings available. In setting
1, the device will operate at fan speed 2 for 30 minutes before reducing to fan speed 1. In
setting 2, the device will operate at fan speed 3 for 30 minutes, fan speed 2 for an additional
30 minutes, and will then switch to fan speed 1.
Humidification Mode
Humidification can be activated in any of the modes above. When activated, the device will
2
6
English | 9 of 90
1
3
4
5
Werbung
Inhaltsverzeichnis
