Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
H63.0.21.6C-02_VWR
9 Technical service
Web Resources
Visit the VWR website at
• Complete technical service contact information
• Access to the VWR Online Catalogue, and information about accessories and related products
• Additional product information and special offers
Contact us For information or technical assistance contact your local VWR representative or visit.vwr.com.
10 Warranty
VWR warrants that this product will be free from defects in material and workmanship for a period of two (2) years
from date of delivery. If a defect is present, VWR will, at its option and cost, repair, replace, or refund the purchase
price of this product to the customer, provided it is returned during the warranty period. This warranty does not apply
if the product has been damaged by accident, abuse, misuse, or misapplication, or from ordinary wear and tear. If the
required maintenance and inspection services are not performed according to the manuals and any local regulations,
such warranty turns invalid, except to the extent, the defect of the product is not due to such non performance.
Items being returned must be insured by the customer against possible damage or loss. This warranty shall be limited
to the aforementioned remedies. IT IS EXPRESSLY AGREED THAT THIS WARRANTY WILL BE IN LIEU OF ALL
WARRANTIES OF FITNESS AND IN LIEU OF THE WARRANTY OF MERCHANTABILITY.
11 Specification
Measurement
Method
Characteristic curves
Measuring ranges
Resolution
Moisture rating
Accuracy
Display
Pushbuttons
Hold function
Operating conditions
Storage temperature
Power supply
Current consumption
Used battery display
Auto-Off-Function
Housing
Dimension
Weight
EMC
Operating Manual RM 20
vwr.com
for:
resistive material-moisture-measuring via integrated needles
11 characteristic material curves for wood an construction materials
0,0 ... 50 %w (water content)
0,0 ... 100 %u (material moisture)
0,1 %, over 19.9 %: 1 % (for %u and %w)
6-stage bar graph display from WET to DRY
the achievable accuracy depends significantly on the application and the properties
of the measured material!
2 displays for material and measured value
3 membrane keys for on/off switch, menu operation, characteristic curve selection,
hold-function etc.
press button to freeze current value
-5 to 50 °C; 0 to 95 %RH (non condensing, material not frozen!)
-25 to 70 °C
9 V block battery, type IEC 6F22 (included)
approx. 1.8 mA
bAt" displayed if battery used, warning: "bAt" blinking
device will be automatically switched off if not operated for longer time
(adjustable from 1..120min)
impact-resistant ABS plastic housing, front side IP65
110 x 67 x 30 mm (L x B x D) + Needles 26mm
155 g (incl. battery)
The device corresponds to the essential protection ratings established in the
Regulations of the Council for the Approximation of Legislation for the member
countries regarding electromagnetic compatibility (2004/108/EG), additional error: <
1% FS
page 9
Werbung
Inhaltsverzeichnis
