Ending The Programming Menu; Menu Functions - Abus AZ6301 Installations- Und Bedienungsanleitung

If you have already made settings on the device, then the following
message is shown on the standby display:
Enter your user code (default: 1234). The following message is shown
in the display:
The programming menu is now active.
IMPORTANT
If no entries are made in the programming menu for 60 seconds, then
the device leaves the programming mode automatically.
9.2.2

Ending the programming menu

1. Press the
following.
Press to leave the programming menu and return to the standby
menu.

10. Menu functions

The menu functions are used for configuring the Terxon PSTN dialer
and offer a wide range of test possibilities.
Menu function
Telephone numbers
Messages
Delete
Programming code
Code length
SD1
READY
key repeatedly until the display shows the
READY
Description
Entry of telephone numbers 1-4
Recording voice messages
Deleting messages and contacts
Changing the programming code
Length of the programming code
47