4
Starting Up
1.
Remove the device carefully from the packaging.
Attention:
The underside of the cutting mechanism attachment has sharp edges. Risk
of injury!
2. Place the device on a level surface.
3. Position the device near a power socket. However, do not position it near a source of
heat or water.
4. Lock the safety guard of the automatic paper infeed by turning the locking bolt to its
LOCK position using a coin.
5. Insert the waste bin.
Note:
The shredder only operates when the original waste bin is inserted cor-
rectly.
1. Set the On/Off switch to its OFF position.
2. Connect the power plug to a power socket.
Note:
Pay attention that the power cable is laid so that people or pets do not walk
over it or that other objects can be set down on it. Pay attention to the in-
formation regarding power supply on the rear side of the device for the ne-
cessary precautions.
Safety information:
For reasons of safety, the power socket to which the shredder
power plug is connected must be near to the device and freely
accessible so that the power supply can be disconnected
quickly in an emergency!
19