➢ Main unit
➢ Turntable platter
➢ Dust cover
➢ Instruction manual
POWER SOURCE
This system is designed to operate on normal 230V 50Hz AC only.
Attempting to operate from any other power source may cause
damage to the system, and such damage is not covered by your
warranty.
NOTE: If this plug will not fit into your outlet, you probably have an
outdated non-polarized AC outlet. You should have your outlet
changed by a qualified licensed electrician.
Connect the speaker cable to the speaker terminal located on
the rear side of the unit. Put the red cable into the red terminal
and the black cable in the black terminal of the speaker position
(left and right).
BATTERY INSTALLATION OF REMOTE CONTROL
The battery compartment is located on the back of the remote control.
Remove the battery compartment door by pressing in on the tab
1.
and lifting it off.
Insert two (2) AAA size batteries (not included) into the battery
2.
compartment following the polarity markings inside the battery
compartment.
Replace the battery compartment door.
3.
Power ON / OFF
Press "STANDBY/MODE" button at the unit or "
working mode.
Press and hold "STANDBY/MODE" button or "
unit in standby mode.
CONTENT OF DELIVERY
➢ Speaker
➢ Slip mat
➢ DAB / FM Antenna
GETTING STARTED
BASIC OPERATIONS
" button on the remote control to enter the
" button on the remote control to turn off the
3
PL895 / English Instruction Manual
AC Plug
AC Outlet