Before Use - ROWENTA DW95X Bedienungsanleitung

DESCRIPTION
EN
1.
Smart Led Screen with
electronic temperature control
2.
Mode button
3.
Steam trigger
4.
Cord
5.
Handle
STEAMFORCE PRO, CONCENTRATED INNOVATION...
Innovative Steam Power Control technology provides stunning results with flawless precision.
Let's break the rules of performance. The powerful pump system inspired by Rowenta's line
of steam stations provides up to 2X more steam into the fabric* to achieve perfect results.
The Steam Power Control Technology allows perfect control over the steam power. A smart
trigger enables you to control the amount of steam and activate it only when you need, for
a personal experience.
Smart control panel has 5 pre-settings for different fabric types. Smart controls will
automatically adapt to a precise temperature of the soleplate and steam output. There's no
need to worry about burning your fabrics.
* compared to an iron with no pump, Rowenta DW53xx

BEFORE USE

Please read carefully the "Safety and use instructions" booklet before first use.
USE
1 • Filling the water tank
• Before filling the water tank, unplug the iron
• Open the water filling inlet fig
filling inlet and return the iron to the horizontal position.
• You can plug in your iron fig 4
2 • Setting the temperature
Your iron is equipped with the Autosteam Electronic Control function, it automatically
adjusts the steam amount and the temperature based on the selected fabric for
optimum results. Select the fabric to be ironed by pressing the MODE button to
select the appropriate fabric. fig
fabric has been pre-defined.
When your iron reaches the required temperature, the selected fabric in the LED
screen stops flashing and is displayed constantly
SCREEN
INDICATION
NYLON
WOOL
COTTON
LINEN
6.
Water tank
7.
High precision tip
8.
Soleplate
9.
Filling inlet
10.
Rear cover
fig 1.
2. Fill in water up to the Max. mark.
.
5. For perfect results, an optimum position for each
fig 6. You can start ironing.
FABRIC IRONING LABEL
nylon (Synthetic
fibres, e.g. viscose,
polyester)
SILK silk
wool
cotton
linen
4
IMPORTANT The iron takes longer to cool down than to heat up. We recommend
that you start with fabrics to be ironed at a low temperature. For mixed fabrics set the
temperature for the most delicate fabric.
TIP: Always spray starch onto the reverse side of the fabric to be ironed.
3 • Dry ironing
For dry ironing, do not press the steam trigger. Ideal for delicates or perfect finishing.
4 • Steam ironing
This iron is equipped with an on-demand steam trigger so you can activate the steam only
when needed and control the steam output according to your needs.
To start the steam output, press continuously the trigger to the first level
On NYLON mode, the steam is blocked in order to protect your clothes.
fig 3. Close the
On linen and cotton mode only, to eradicate the toughest creases, you can activate the steam
boost: press the trigger to the max level (1 seconde max) and release (
a few seconds between each shot before pressing the trigger again.
IMPORTANT Leave an interval of a few seconds between each shot and wait until the
flow of steam has finished before standing the iron on its heel.
5 • Vertical shot of steam
Select the Linen mode and hold the iron vertically. Press the trigger to the max level to activate
the shot of steam to remove creases from suits, jackets, skirts, hanging curtains etc.
a few seconds between each shot before pressing the trigger again.
IMPORTANT Never direct the steam at persons or animals!
TIP Hold the iron 20 centimetres away from the garment to avoid burning delicate
fabrics.
CONTINUOUS STEAM
CONTINUOUS STEAM
STEAM BOOST
STEAM BOOST
5
EN
fig 7-a or below.
fig 7-b or
below). Wait
fig 8 . Wait