9. In case of an event caused by a technical malfunction, disconnect
the appliance from the mains (fuse box of your household power
supply). Contact the aftersales service or the shop you purchased
the appliance at.
10. Do not modify the plug provided with the appliance, if it will not fit the
outlet, have a proper outlet installed by a qualified electrician (not
covered by the guarantee).
11. When the power cord is damaged, it must be replaced by the
manufacturer or an authorised aftersales service or a qualified
professional only.
12. Never pull the power supply cable to unplug the appliance. Always
use the power plug itself to unplug the appliance. RISK OF
ELECTRIC SHOCK!
13. Never touch power plugs, power switches or other electrical
components with wet or damp hands. RISK OF ELECTRIC SHOCK!
To reduce the risk of burns, electrocution, fire or injury to persons
1. Operate the appliance with 220 ~ 240 V AC / 50 Hz only.
2. Disconnect the appliance from the mains before you clean or
maintain it.
3. Connect the appliance to a properly grounded socket only. Use a
safety socket to minimise any risk of electric shock.
4. The technical data of your energy supply must meet the data on the
rating label. The main current circuit must be equipped with a safety
shut-down device.
5. If you are in doubt as to whether the appliance is connected to the
mains properly, let the electrical connection be checked by a qualified
electrician (not covered by the guarantee).
6. All modifications to the electrical mains to enable the installation of
the appliance must be performed by a qualified professional.
7. Keep the cord away from heated surfaces.
8. Do not carry out any modifications to your appliance.
9. The appliance is not allowed to be operated with an external timer or
a separate remote-control-system.
10. Do not use adapters, multiple sockets and extension cords for
connecting the appliance to the mains.
11. The room the appliance is installed in must be dry and well-
ventilated. When the appliance is installed, an easy access to all
control elements is required.
14
Depending on model: s. page « S
RISK OF ELECTRIC SHOCK!
14
WARNING!
ERVICE INFORMATION
~
57
» at the end of this instruction manual.
~