Operation; Unpacking The Appliance; Attaching The Accessories - Kärcher SC1702 Betriebsanleitung

2. Safety Instructions
Steam cleaning is prohibited on all electrical
appliances, i.e., hair dryers, electrical
heaters, etc. that allow direct steam contact
with electrical wiring and switches. The
steam could enter into the electrical
components and, on condensing, cause an
electrical defect.
Never touch the steam jet with your hand, or
direct it at persons or animals (scalding
hazard).
Materials containing asbestos and other
items known to contain hazardous
substances must not be steam-cleaned.
Operating the Unit
The operator may use the unit only as
described in the Operating Instructions. He
is obligated to observe local conditions and,
while working with the unit, take into account
the presence of third persons, and especially
children.
The unit may be operated only by persons
who have been thoroughly instructed in its
use, or who have provided proof of their
ability to operate the unit, and who have
been expressly charged with operating the
unit.
The unit is not intended for use by young
children or infirm persons without
supervision.
Young children should be supervised to
ensure that they do not play with the unit.
The unit must never be without supervision
while it is operating.
Maintenance
Prior to performing
maintenance procedures, and before
replacing parts, the unit must be switched
OFF, and the power plug must be
disconnected.
Repair and service procedures may only be
performed by authorised customer service
depots or by experts who are thoroughly
familiar with all applicable safety regulations.
Storage
Caution: Caution: Caution: Never operate or store the Caution: Caution:
appliance in a horizontal position!
Protect the unit from rain. Do not store out-
side.
18 – English
When you unpack the appliance, check that
everything is complete. If there are any missing
parts or you detect any transport damage,
please inform your dealer immediately.
Do not place the packaging into the
ordinary refuse for disposal. The
packaging materials can be recycled.
Please dispose of it at an appropriate
collection point.
• Firmly insert the modular accessory plug (C7)
• Connect the desired accessory part (D1, E1,
cleaning and
• If required, use the extension tubes (G1).

3. Operation

Unpacking the Appliance

Attaching the Accessories

into the appliance connector (A1). Both pins of
the modular accessory plug must lock into the
cover of the appliance connector (see Figure 1).
Figure 1: Inserting the modular accessory plug
F1) with the steam gun (C1).
Put the tubular end of the accessory part on the
steam gun (C1). Then, push the accessory part onto
the steam gun until the unlocking button (C3) of the
steam gun locks into place (see Figure 2).
Figure 2: Attaching accessory to the steam gun
Attach one or both extension pieces (G1) to
the steam gun (C1) (see Figure 3). Then, push
the desired accessory part (D1, E1, F1, H1)
onto the free end of the extension tube.
Figure 3: Attaching the extension pieces
SC 1702