Gas Connection; Product Overview - STAMOS TRON 200 ONE Bedienungsanleitung

• The unit should be connected by a qualified person. In addition, a person with the necessary
qualifications should check that the earthing and electrical installation including protection
system complies with safety regulations and is functioning properly.
Place the unit near the work area.
•
• Avoid excessively long wires to connect the unit.
• Single-phase welding machines should be connected to an outlet equipped with a grounding
pin.
• Welders supplied from 3-phase mains are delivered without a plug, you should obtain one
yourself and have it installed by a qualified person.
CAUTION! The device may only be operated if connected to installation with a functional fuse.

1.9.2. Gas connection

• Place the gas cylinders away from the object to be welded and secure them against falling.
• The gas connection of the welding machine must be connected to the gas cylinder or to the
gas supply system with a suitable hose and a regulator with a gas flow control. Caution! It is
not allowed to use network regulators for gas cylinders and vice versa. Such interchange
may result in reducer damage and personal injury.
• Economical use of gas prolongs the welding time.

Product overview

6.
Front view