Button Functions - Roadstar IR-390D+BT Bedienungsanleitung

English 2
Wireless B, G and N connection (Wireless N router can also be used with the setting
on B or G); You know the Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access
(WPA) data encryption code / password. You need to key in the correct code when
the radio is connected to the wireless router for network connection. If you do not
know the code/password, please contact the person /technician who set up the router/
network for you.
If the internet connection is not active, some services, such as Internet Radio, Sleep
Radio, etc., cannot be used.
PRECAUTIONS
The radio should not be used in a high temperature / high humidity environ-
ment over prolonged periods of time as this may damage the unit.
Keep the radio away from liquids as it may get damaged. Please switch off the
radio immediately if water or liquids is spilled into the radio. Consult with the
shop you bought this radio for any question. Avoid using or storing the unit in
dusty or sandy environment Do not open and repair the radio by yourself.
Clean only with dry cloth.

BUTTON FUNCTIONS

(See display for more info about button functions)
LEFT (6):
DAB and Internet Radio: Short press > List Radio, Long press > Previous Station
FM: Short press > Fine Tune, Long press > Search Station
RIGHT (9):
DAB and Internet Radio: Short press> Big Icon, Long press > Next Station
FM: Short press > Fine tune, Long press > Search Station
UP (12 or 21 on remote control):
DAB and Internet Radio: Previous Station
FM: Short press > Fine tune, Long press > Search Station
DOWN (12 or 23 on remote control):
DAB and Internet Radio: Next Station
FM:Short press > Fine tune, Long press > Search Station
SWITCHING ON THE RADIO (FIRST SETTING)
Switch the radio on using the POWER button (4).
The display will light up and show "WELCOME".
Select the language with UP/DOWN cursors (12).
The radio will ask if you want to "Check Network" when power on.
Radio will ask if you want to "Configure Network"
If you choose to configure network now, please follow next steps, otherwise you can
configure it later. The radio will check for networks.
Select your network with UP/DOWN cursors (12).
Insert the password: press repeatedly letters and numbers (24) or UP/DOWN cursors
(12) to enter a character.
Move to next or previous character with LEFT/RIGHT cursors (6/9). Confirm with OK
(16).
To switch off the product, long press POWER button (4).