Mounting On The Underside Of A Hanging Furniture - KKT KOLBE TEL350 Benutzerhandbuch

Mounting the hood
9.2 Mounting on the underside
of a hanging furniture
To attach the hood to the underside
of a wall cabinet or similar,
proceed as follows:
• Remove the metal filters from the
hood, lift the hood body and place it
on the bottom of the hanging furniture
in the desired position.
• Mark the size and position of the air
outlet and the cable connection,
as well as the drill holes and from the
inside of the hood on the furniture
bottom and put the hood down again.
• Saw a recess for the exhaust air
opening and the cable connection in
the furniture bottom and pre-drill the
screw hole markings accordingly.
• Screw the supplied screws into the
holes provided on the bottom of the
funiture, but not completely yet.
60
• Place the screw holes on the top of the
hood onto the screws, move the hood
body so that the screws slide into the
narrow part of the screw holes and
tighten the screws from the inside of
the hood.
• For exhaust air operation, attach an
exhaust air hose (diameter 150 mm)
in the cut-out on the air outlet of the
cooker hood and connect it to the
exhaust air opening.
• Make sure that the metal grease filter
is fully reinserted before using the
appliance.