Safety Instructions; Technical Data - Stalgast 484421V01 Bedienungsanleitung

Thank you for purchasing our product. Please read this manual carefully before using it for the first time.
In order to provide you with the best technical solutions for your devices, we are constantly developing them technologi-
cally. Therefore, the pictures and drawings in this manual may differ from the purchased device.
NOTE: Keep this manual in a safe place that is accessible to personnel. The manufacturer reserves the right to change
technical parameters of the devices. Copying of this manual without permission of the manufacturer is prohibited.

1. SAFETY INSTRUCTIONS:

• Incorrect maintenance and/or use may cause serious harm to people and damage the device.
• The device can only be used for the purpose for which it has been designed.
• The manufacturer does not take any responsibility for damages caused by improper maintenance or use of the device.
• When in use, secure the device and its electrical plug from any contact with water or other fluids. In case the device
is accidentally dropped into water the electrical plug should be immediately removed from the socket and the device
should be inspected by a trained professional.
• ATTENTION: Failure to obey these instructions may cause life threatening danger.
• Never open the casing of the device on your own.
• Do not stick any objects into the casing of the device.
• Do not touch the electrical cord with wet hands.
• Check the condition of the electrical plug and cord regularly. In case any damage to the plug or cord is discovered
order repair by a specialized service provider.
• In case the device is dropped or damaged otherwise, before further use always order a check-up and repair by a spe-
cialized service provider.
• Do not make any attempts to repair the device on your own – this may cause life threatening danger.
• Protect the electrical cord from contact with sharp or hot objects and keep it away from open fire. When you discon-
nect the device from the electrical socket always hold the plug and never pull the electrical cord.
• Secure the electrical cord (or the extension cord), so that it is not unplugged by mistake and so that no one can stum-
ble over it.
• Monitor functioning of the device while in use.
• Use of the device by people underage, physically or mentally incapable, with motion disorders as well as people witho-
ut proper experience and knowledge regarding the use of this device should not be allowed. All of the above should
only use the device under supervision of a person responsible for their health and safety.
• When not used or during maintenance you should always unplug the device from the source of electricity by removing
the electrical plug from the socket.
• ATTENTION: when the electrical plug is plugged into the socket the device is constantly live.
• Turn off the device before you pull the plug from the power outlet.
• The device must be visible and easily accessible after installation.
• Ensure easy access to the plug of the non-removable power cord.
• For your safety and to prevent damage to the blender, do not put your hands or any utensils into the container when
the unit is on.
• The knives are very sharp. Special care should be taken.
• Always use the blender with the lid properly placed on the container.
• If the pusher is placed in the lid, the container should be filled to no more than 2/3 of its volume.
• Blending should not take more than one minute, too long operation can cause overheating of the device. In this case,
unplug the device, wait until it cools down ( about 60 minutes).
• Use the blender on flat, stable and dry surfaces.
• Before turning on the device, make sure that the container and lid are properly placed and secured. Hold the appliance
by the lid with your hand before turning it on and during operation.
• Use caution when blending hot liquids. Start work at the lowest speed, gradually increasing the speed.
• When blending hot liquids, remove the lid cap.
• Never use the pusher if the lid has not been placed on the container. Remove the lid cap before using the pusher.

2. TECHNICAL DATA

Model
Supply voltage
Power
Dimensions WxDxH
Capacity
Maximum speed
484421V01
230 V \ 50/60 Hz
2000 W
200x230x450 mm
2 l
32000 rpm
- 8 -